CPU temp pwmconfig error
#1
Γεια σας παιδια! Αγορασα νεο λαπτοπ και εχω θερμοκρασιες με enabled το virtualization technology γυρω στους 44 βαθμους...Καλα ειναι?

Επισης προσπαθησα να τρεξω το pwmconfig για να ρυθμισω το fancontrol (μου φενετε οτι δεν δουλευει γρηγορα ο ανεμηστηρας) αλλα μου εβγαλε το εξης:

Y.γ. το arch ειναι πανω στο uefi

Κώδικας:
# pwmconfig revision 6243 (2014-03-20)
This program will search your sensors for pulse width modulation (pwm)
controls, and test each one to see if it controls a fan on
your motherboard. Note that many motherboards do not have pwm
circuitry installed, even if your sensor chip supports pwm.

We will attempt to briefly stop each fan using the pwm controls.
The program will attempt to restore each fan to full speed
after testing. However, it is ** very important ** that you
physically verify that the fans have been to full speed
after the program has completed.

/usr/bin/pwmconfig: There are no pwm-capable sensor modules installed
[root@lenovo-pc device]#


τι κανω?? σας δινω και τις εντολες sensors και sensors detect
Κώδικας:
[root@lenovo-pc device]# sensors
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0:  +41.0°C  (high = +105.0°C, crit = +105.0°C)
Core 0:        +41.0°C  (high = +105.0°C, crit = +105.0°C)
Core 1:        +41.0°C  (high = +105.0°C, crit = +105.0°C)

radeon-pci-0400
Adapter: PCI adapter
temp1:            N/A  (crit = +120.0°C, hyst = +90.0°C)

Κώδικας:
[root@lenovo-pc device]# sensors-detect
# sensors-detect revision 6284 (2015-05-31 14:00:33 +0200)
# System: LENOVO 80E5 [Lenovo G50-80] (laptop)
# Board: LENOVO Lenovo G50-80
# Kernel: 4.1.6-1-ARCH x86_64
# Processor: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz (6/61/4)

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no):
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595...                      No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                  No
AMD Family 10h thermal sensors...                          No
AMD Family 11h thermal sensors...                          No
AMD Family 12h and 14h thermal sensors...                  No
AMD Family 15h thermal sensors...                          No
AMD Family 16h thermal sensors...                          No
AMD Family 15h power sensors...                            No
AMD Family 16h power sensors...                            No
Intel digital thermal sensor...                            Success!
    (driver `coretemp')
Intel AMB FB-DIMM thermal sensor...                        No
Intel 5500/5520/X58 thermal sensor...                      No
VIA C7 thermal sensor...                                    No
VIA Nano thermal sensor...                                  No

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'...              No
Trying family `SMSC'...                                    No
Trying family `VIA/Winbond/Nuvoton/Fintek'...              No
Trying family `ITE'...                                      No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'...              Yes
Found unknown chip with ID 0x8586

Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no):
Probing for `National Semiconductor LM78' at 0x290...      No
Probing for `National Semiconductor LM79' at 0x290...      No
Probing for `Winbond W83781D' at 0x290...                  No
Probing for `Winbond W83782D' at 0x290...                  No

Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no):
Found unknown SMBus adapter 8086:9ca2 at 0000:00:1f.3.
Sorry, no supported PCI bus adapters found.
Module i2c-dev loaded successfully.

Next adapter: i915 gmbus ssc (i2c-0)
Do you want to scan it? (yes/NO/selectively):

Next adapter: i915 gmbus vga (i2c-1)
Do you want to scan it? (yes/NO/selectively):

Next adapter: i915 gmbus panel (i2c-2)
Do you want to scan it? (yes/NO/selectively):

Next adapter: i915 gmbus dpc (i2c-3)
Do you want to scan it? (yes/NO/selectively):

Next adapter: i915 gmbus dpb (i2c-4)
Do you want to scan it? (yes/NO/selectively):

Next adapter: i915 gmbus dpd (i2c-5)
Do you want to scan it? (yes/NO/selectively):

Next adapter: DPDDC-A (i2c-6)
Do you want to scan it? (yes/NO/selectively):

Next adapter: DPDDC-C (i2c-7)
Do you want to scan it? (yes/NO/selectively):

Next adapter: Radeon i2c bit bus 0x90 (i2c-8)
Do you want to scan it? (yes/NO/selectively):

Next adapter: Radeon i2c bit bus 0x91 (i2c-9)
Do you want to scan it? (yes/NO/selectively):

Next adapter: Radeon i2c bit bus 0x92 (i2c-10)
Do you want to scan it? (yes/NO/selectively):

Next adapter: Radeon i2c bit bus 0x93 (i2c-11)
Do you want to scan it? (yes/NO/selectively):

Next adapter: Radeon i2c bit bus 0x94 (i2c-12)
Do you want to scan it? (yes/NO/selectively):

Next adapter: Radeon i2c bit bus 0x95 (i2c-13)
Do you want to scan it? (yes/NO/selectively):

Next adapter: Radeon i2c bit bus 0x96 (i2c-14)
Do you want to scan it? (yes/NO/selectively):

Next adapter: Radeon i2c bit bus 0x97 (i2c-15)
Do you want to scan it? (yes/NO/selectively):


Now follows a summary of the probes I have just done.
Just press ENTER to continue:

Driver `coretemp':
  * Chip `Intel digital thermal sensor' (confidence: 9)

Do you want to overwrite /etc/conf.d/lm_sensors? (YES/no):







Unloading i2c-dev...
OK
Unloading cpuid... OK
Love Open source...Love ArchLinux...
[Εικόνα: archlinux-user.png]
  Απάντηση
#2
Η θερμοκρασία που αναφέρεις "44" είναι πολύ καλή. Αυτό όμως σε συνάρτηση με το πως χρησιμοποιείς τον υπολογιστή.
Εαν δεν κάνεις τίποτα (idle) δεν σημαίνει και πολλά. Αν όμως για παράδειγμα κάνεις επεξεργασία ήχου, εικόνας ή βίντεο
και μετά από μια ώρα επεξεργασίας έχεις τα ίδια περίπου νούμερα τότε όλα καλά,
Όταν κάτι δεν θα πηγαίνει καλά για παράδειγμα καλοκαίρι με 40 °C και το ανεμιστηράκι καμμένο, υπάρχουν αισθητήρες στο hardware όπου για να το προφυλάξουν θα τερματίσουν την λειτουργία του υπολογιστή. Και μιλάω για θερμοκρασίες της τάξης των 100 °C και άνω.
Γνώμη μου λοιπόν είναι πως δεν χρειάζεται απαραίτητα να προσπαθείς να ελέγξεις τη συχνότητα που λειτουργεί ο ανεμιστήρας σου αλλά να φροντίσεις να αερίζεται επαρκως το σύστημα γιατί τα laptop ανεβάζουν εύκολα θερμοκρασίες. Ίσως με κάποια βάση ή Docking Station!
  Απάντηση
#3
Κοιτα...Δεν εχω κανει καμια τρελη δουλεια...πχ εχω youtube hd 6-7 καρτελες στον firefox και το gimp στην επεξεργασια εικονων.
Η θερμοκρασια max εχω φτασει μεχρι 47 βαθμους.
Γενικα ομως το λαπτοπ ειναι κρυο. Και στους 47 δεν ειναι ζεστο απο κατω!
Love Open source...Love ArchLinux...
[Εικόνα: archlinux-user.png]
  Απάντηση


Ίσως Σχετικά Νήματα...
Νήμα Άτομο Απαντήσεις Βλεφαριάσματα Τελευταία Ανάρτηση
  error while loading shared libraries: libiw.so.29: cannot open shared object file antonio 6 1.135 10.02.2014 21:08
Τελευταία Ανάρτηση: antonio
  μηνυμα error μετα τον grub-bios στην εκκινηση. [Λύθηκε] blackm76 2 533 28.04.2013 16:39
Τελευταία Ανάρτηση: blackm76
  ArchBang Error [Λύθηκε] tr3quart1sta 12 1.532 12.09.2011 13:53
Τελευταία Ανάρτηση: modenas88

Πάμε στο Forum:


Πλάσματα σουλατσάρουν στο νήμα: 1 Επισκέπτης(ες)